NMB 4715KL-04W-B56 PB1 12V DC Axial Fan
- Product SKU: CFS-U001626
- Category: 12 Volt DC Cooling Fans, DC Brushless Fans, NMB Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: 4715KL-04W-B56 PB1
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
Reference-image notice: 4715KL-04W-B56
Gallery images labelled as supplier references depict a different unit. The exact unit, condition and configuration available for supply have not been verified. The supplier image shows 7192380/E56/EP and three visible lead colours; the originals show Y4574/PB1, different maker wording and four-colour twisted leads. These differences do not establish interchangeability. Original photographs and the detailed evidence guide are provided below.
4715KL-04W-B56 PB1 label and selection
The original listing photographs identify this NMB axial fan as 4715KL-04W-B56 PB1. The values below are a transcription of the photographed unit, not an independent performance test.
| Manufacturer on label | NMB-MAT |
|---|---|
| Photographed complete model / option | 4715KL-04W-B56 PB1 |
| Nameplate voltage | 12V DC |
| Nameplate current | 1.30A |
| Visible fitted leads | 4; signal functions not established |
| Mechanical and performance data | Exact-version drawing and performance are not confirmed |
Which version should I match?
Match the complete 4715KL-04W-B56 PB1 code. The added option distinguishes the photographed version; a shared base model does not establish equal wiring or performance.
What else should I verify?
The photograph shows 4 leads, but it does not establish a PWM input, tachometer pinout, airflow or noise rating.
Product listing photograph. For a comparison, send a fan photo; for quantities, request a quote.
Gallery reference and original-photo evidence
Gallery images labelled as supplier references depict a different unit. It does not verify the exact unit, condition, revision, harness or quantity currently available for supply. Earlier references to the original listing photographs or pictured unit refer to the original photographs linked below, not to this supplier reference.
Original listing photograph observations
| Main/full printed identification | 4715KL-04W-B56; separate boxed PB1 |
|---|---|
| Photographed input | 12V DC1.30A |
| Physical label maker | NMB-MAT; Minebea-Matsushita Motor Corporation |
| Separate marks/origin | Y4574; boxed PB1; MADE IN CHINA; printed +RED/-BLACK |
| Pictured harness | Four red/dark/blue/pale twisted sections into a black housing, with metal-coloured retainer. Functions and pinout unverified. |
| View limit | Two rear whole views; Store No 518335 overlay across lower body/harness and a top-left patch in one view. No independent same-unit or condition proof. |
Different-unit supplier reference
ElecSpares reference page for NMB 4715KL-04W-B56 is a third-party supplier source. It is not a manufacturer specification or an inventory check for this listing.
| Main/full printed supplier identification | NMB 4715KL-04W-B56 |
|---|---|
| Printed supplier input | 12V DC 1.30A |
| Physical label maker | NMB; Minebea Co., Ltd. |
| Separate marks/origin | 7192380; boxed E56; EP; MADE IN CHINA; printed +RED/-BLACK |
| Visible harness/context | Three red/dark/pale sections under metal-coloured retainer; complete remote termination not shown. Scenic background composition; earlier processing unknown. The same source photograph is also used for another listing. |
Material differences: Historical NMB-MAT/Minebea-Matsushita/Y4574/PB1 and four red/dark/blue/pale twisted sections into black housing differ from source NMB/MinebeaCo/7192380/E56/EP/three visible colours. The selected supplier rear view does not establish front-hub equivalence. Shared source photography across listings does not prove additional physical units, available stock, pinout or same-unit identity.
Matching the displayed main identification and input does not establish equivalent ordering options, mechanical fit, connector keying, electrical pinout, polarity, signal functions, complete supplied harness or supply condition. Separately printed maker, country, boxed, stamp and other marks are preserved as observations; their ordering meaning is not inferred. Printed certification or polarity symbols are not independent test evidence.
Unseen front, side, remote termination and hidden product areas are not reconstructed. Separate source or original photographs do not prove one physical unit. The same source photograph may support more than one listing; reuse does not establish extra units, stock or included quantity.
Original photograph links and verification limits
- Original listing photograph 1: Oblique rear whole with full label/PB1, long four-colour twisted harness and black housing; Store No 518335 overlay on lower body/harness.
- Original listing photograph 2: Rear whole with Y4574/PB1 label and harness; Store No 518335 overlay lower body; blank/corner patch at top-left.
These original files are preserved as evidence even when their seller-watermarked versions are not used in the public gallery. Their label observations, listed dimensions and any separately cited manufacturer documents remain qualified by the limits stated above and in the earlier description. Photographs do not measure dimensions, establish exact-version performance or confirm actual inventory.
Before ordering, compare your original complete model and ordering fields, nameplate, mounting, housing/outlet and actual connector. Request available-unit label and connector verification or request a quantity quote. Do not select a supplied revision or wire function from a reference photograph alone.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.