Delta AFB0912H-AF00 92x92x25.4mm 12V DC Axial Fan
- Product SKU: CFS-U002609
- Category: 12 Volt DC Cooling Fans, 90/92x25mm Cooling Fans, DC Brushless Fans, Delta Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: AFB0912H-AF00
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
Delta AFB0912H-AF00 specifications and selection
The original listing photograph matches AFB0912H-AF00. Reference values below come from Delta Sample Rev.01, dated 25 February 2008. AF00 has its own specification; older AFB0912H-F00 performance is not substituted.
| Complete model | AFB0912H-AF00 |
|---|---|
| Bare fan dimensions | 92x92x25.4mm |
| Rated and operating voltage | 12V DC; 5.0–13.8V DC operating range |
| Input and nameplate current | 0.21 A input; 0.30 A maximum / nameplate |
| Input power | 2.52 W input; 3.60 W maximum |
| Speed reference | 2800 RPM ±10% |
| Airflow | 59.89 CFM; 1.696 m³/min at zero static pressure |
| Static pressure | 0.191 in H2O at zero airflow |
| Noise | 37 dB(A) average; 41 dB(A) maximum |
| Bearing | Two ball bearings |
| Operating temperature | -10 to +70°C |
| Wiring reference | Blue frequency output (F00); red positive and black negative per exact AF00 drawing |
| Photographed configuration | The label shows AFB0912H with separate -AF00 suffix, 12V and 0.30A. Three red, black and blue leads and a fitted connector are visible. |
What should I check before ordering?
Measurements follow a ten-minute warm-up. Noise is measured at rated voltage in free air, one metre from the intake in an anechoic chamber. Airflow and pressure are separate endpoint tests. Match the complete suffix, mounting and supply; confirm the fitted connector pinout before replacement.
Delta AFB0912H-AF00 Sample Rev.01, pages 1, 2, 3 and 6
For help comparing the full label and connector, send a fan photo.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.
