Delta EFB0412HHD-R00 12V 40x40x20mm Cooling Fan
- Product SKU: CFS-U001805
- Category: 12 Volt DC Cooling Fans, 40x40x20mm Cooling Fans, DC Brushless Fans, Delta Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: EFB0412HHD-R00
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
Delta EFB0412HHD-R00 specifications and selection
The listing photograph shows EFB0412HHD-R00, 12 V DC and 0.15 A. The printed current corresponds to the maximum in Delta's exact-model specification.
| Frame | 40x40x20mm |
|---|---|
| Rated supply | 12 V DC |
| Operating voltage | 7-13.8 V DC |
| Input current | 0.10 A input; 0.15 A maximum / label |
| Input power | 1.2 W; maximum 1.8 W |
| Reference speed | 8200 RPM |
| Maximum airflow | 9.43 CFM / 16.02 m3/h at zero static pressure |
| Leads | Catalog: red positive, black negative, blue lock signal; photographed red/black/white leads, actual functions and pinout unverified |
What should I check before ordering?
Match the complete suffix, frame, supply and connector pin assignment. Delta's catalog assigns a lock signal to the blue lead; the photographed white auxiliary lead is not identified by colour alone. Airflow in installed equipment depends on system resistance; the catalog maximum is measured at zero static pressure after warm-up.
Delta specification revision 00, 2007-07-03
For help comparing the full label and connector, send a fan photo.
External reference photograph - confirm the supplied version: Image 1 is an independent-unit front reference from the CWC Group EFB0412HHD-R00 gallery. The same actual page gallery rear photograph shows EFB0412HHD, separate -R00, DC12V and 0.15A; the front itself does not print the model. Its source auxiliary marking is 7218e / 11R, versus 1X19C3R on the original listing label retained in image 2. Image 2 preserves the complete original rear, nameplate and actual red/black/white wiring with white plug. These are independent photographed units, not a same-capture original or confirmation of current shipping stock. The 650-by-433-pixel reference is reproduced without resampling or redrawing here; its earlier processing history is unknown. Confirm the supplied complete label, connector, auxiliary-lead function and pin assignment; neither the source front nor wire colour verifies the supplied pinout.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.