Delta FFB0924EHE-F00 24V DC 92x92x38mm Cooling Fan
- Product SKU: CFS-DC-00000-24V-U
- Category: 24V DC Cooling Fans, 90/92x38mm Cooling Fans, DC Brushless Fans, Delta Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: FFB0924EHE-F00
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
Delta FFB0924EHE-F00 specifications and selection
The photographed label identifies FFB0924EHE-F00, 24V DC and 0.75 A. The specifications below are from the manufacturer document covering this full model.
| Full model | FFB0924EHE-F00 |
|---|---|
| Rated voltage | 24V DC |
| Bare fan dimensions | 92x92x38mm |
| Input and label current | 0.5 A input; 0.75 A maximum; 0.75 A nameplate |
| Operating voltage | 14–27.6V DC |
| Input power | 12 W input; 18 W maximum |
| Speed | 4800 RPM (reference) |
| Maximum airflow | 110.18 CFM / 3.12 m³/min / 187.2 m³/h at zero static pressure |
| Maximum static pressure | 0.665 inH2O / 16.9 mmH2O (zero airflow) |
| Acoustic noise | 55 dBA average; 59 dBA maximum (free air, 1m intake) |
| Bearing | Two ball bearings |
| Visible leads | 3 (listing photograph) |
| Operating temperature | -10 to +60 C (manufacturer model specification) |
| Standard signal specification | frequency signal; actual fitted wire colors and pinout require confirmation |
What should I check before ordering?
Match the entire model suffix, mounting, connector and pin assignment to the original fan. The listed airflow applies in free air; installed airflow depends on system resistance. The standard document describes a frequency signal on a blue lead, while the listing photo shows a light-colored lead. Actual wiring and connector pinout remain to be confirmed.
Delta exact-model specification
For help comparing the full label and connector, send a fan photo.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.
