Axial Fan for Delta EFB0612MA 12V 60x60x10mm
- Product SKU: CFS-U002012
- Category: 12 Volt DC Cooling Fans, 60x60x10mm Cooling Fans, DC Brushless Fans, Delta Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: EFB0612MA
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
EFB0612MA catalogue reference and selection
Delta lists EFB0612MA in the cited manufacturer or distributor reference. The table describes that documented model; it is not a measurement of current inventory.
| Supply | 12V DC; operating range 7.0–13.8V |
|---|---|
| Frame | 60x60x10mm; drawing tolerance ±0.5mm |
| Current | 0.08A input; 0.12A maximum and safety-label current |
| Power | 0.96W input; 1.44W maximum |
| Reference airflow | 15.54 CFM at zero static pressure |
| Lead function | Red positive; black negative; fitted plug requires confirmation |
Which details should I match?
The specification is revision 00, dated 2007-05-25. Its label drawing shows 0.12A, matching the original photograph; that is not the normal input value. Reference performance is measured at 12V after 10 minutes warm-up at 25°C, 65% RH and 760mmHg. Compare the actual connector and mounting before ordering.
Confirm the complete supplied label and revision, mounting holes, frame depth and electrical termination before ordering. Catalogue values do not prove equipment compatibility or current stock condition.
Delta model reference; send label and connector photographs for comparison; request a quantity quote.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.
