Fan label photo
Connector photo
Delta AFB0812HH-R00 80x80x25.4mm 12V DC Axial Fan
- Product SKU: CFS-U002505
- Category: 12 Volt DC Cooling Fans, 80x80x25mm Cooling Fans, DC Brushless Fans, Delta Cooling Fans
Confirm Fit Before Ordering
Use this quick check first, then review the full Product Specifications tab before placing an order.
Share the original fan label, connector photo, or target quantity so the team can check compatibility or quote bulk supply.
Reference model: AFB0812HH-R00
Product Specifications
Review the technical data used for replacement matching, procurement comparison and engineering approval.
Delta AFB0812HH-R00 specifications and selection
The historical shop label identifies AFB0812HH-R00, 12V DC, with a 0.3 A current marking. The values below are reference specifications from Delta specification Rev.00, dated 2005-03-09. Confirm the current complete label, harness, housing, connector, pinout and functions before replacement.
| Complete model | AFB0812HH-R00 |
|---|---|
| Bare fan dimensions | 80x80x25.4mm |
| Voltage | 12V DC |
| Operating voltage range | 7.0–13.8 V DC |
| Input and nameplate current | 0.2 A input; 0.3 A maximum / nameplate |
| Input power | 2.40 W input; 3.60 W maximum |
| Speed | 3250 ±325 RPM |
| Airflow | 37.43 CFM at zero static pressure; 1.060 m³/min |
| Static pressure | .181 in H2O at zero airflow |
| Noise | 34.0 dB(A) average; 37.0 dB(A) maximum at 1 m intake |
| Bearing | Two ball bearings |
| Wiring and signals | Locked-rotor signal; standard drawing: blue signal, red positive, black negative |
| Historical visible conductor sections | Red, dark and blue sections leave the historical photograph; full free ends, housing and supplied functions are unverified. |
What should I check before ordering?
Delta readings follow a ten-minute warm-up. Airflow and pressure are different endpoint tests, not simultaneous operating values. Noise is measured in free air at rated voltage, one metre from the intake in an anechoic chamber. Match the full model, mounting holes, supply voltage and fitted connector. Lead count does not establish pinout or equipment compatibility.
Delta AFB0812HH-R00 Rev.00 specification, pages 1, 2, 3, 6
For help comparing the full label and connector, send a fan photo.
The label and conductor observations above refer to a historical shop photograph, not proof of the configuration currently supplied.
External reference and historical harness context
Independent reference; supplied configuration requires verification. The 99GO reference label and historical shop label show Delta AFB0812HH, separate -R00, DC12V and 0.30A. The historical photograph shows MM; the reference has ZL/ZP, 2Y01B09R and a QR-style marking. The meaning, protection/configuration significance and version relationship of these auxiliary differences are unverified. These are different photographed units. A supplier companion view shows sleeving and a pale plug, but is not proven to show the same physical unit as the selected label view. In the historical shop photograph, red, dark and blue conductor sections leave the image and their free ends are unshown. The selected label reference also does not show the full termination. Neither the companion-view plug nor sleeve establishes the complete supplied harness, housing, termination, pinout or functions. The source image processing history is unknown; it is not claimed to be an unedited original, the same photo session, or current shipping-stock evidence. The public reference shows a different photographed unit. It does not establish the complete harness, housing, termination or functions of the fan currently supplied. Confirm the actual supplied full option, condition, measured fit, harness, connector and pin assignment before ordering.
Source: External product reference page. Current supplied label, complete harness, connector and pinout still require confirmation.
Compatibility Verification Checklist
Before ordering, please confirm these critical points:
- 1Exact model number on the original fan label
- 2Frame size: length, width and thickness
- 3Rated voltage and current
- 4Connector type and wire sequence
- 5Wire count: 2-wire, 3-wire or 4-wire PWM
- 6Airflow direction and mounting hole position
- 7Cable length and application environment
Still unsure? Send us photos of your fan label, connector and equipment. We will help check compatibility before you order.
Datasheet / Drawing
Use official documents and dimensional references when available. If a document is missing, contact us before ordering for replacement matching support.
Bulk Order
For repair batches, OEM projects or distributor replenishment, send the model number, target quantity, connector requirements and delivery destination.
Shipping & Returns
Shipping options, lead time and return eligibility may vary by product, quantity and destination. Confirm compatibility before ordering replacement fans.
- For bulk orders, request freight planning and availability confirmation before payment.
- For replacement orders, compare model, size, voltage, current and connector before installation.
- Unused items should remain in original condition for return review according to store policy.
FAQ
Common checks for replacement cooling fan sourcing.
Can you help match an old fan?
Yes. Send photos of the fan label, connector and equipment so we can check model, voltage, frame size and wiring.
Can I use a different brand as a replacement?
Often yes, but only after confirming frame size, electrical rating, airflow requirement, bearing type, connector and wire sequence.
What information is needed for a bulk quote?
Send part number, quantity, target lead time, connector or cable requirements and shipping destination.
